Precision collet chuck SK40 (ISO 7388-1) ER16 (1-10 mm) A=200 mm

Application

For clamping tools with straight shanks without loss of concentricity or clamping force up to shank tolerance h10, for economic machining of individual and series parts with extremely high-precision machining results. Ideal for HPC and HSC machining.

Execution

• 30° trapezoidal thread with polished, extra-long double guide with special easy glide coating for low friction.
• Clamping forces are evenly distributed across the entire cylindrical shell surface and perfect surfaces are achieved due to the optimal absorption of the radial forces.
• Precise centring when tightening the clamping nut.
• Suitable torque wrench attachments 23360 960-966 torque wrench is recommended, suitable collet chucks type ER no. 23323 617-658

Advantage

• Resistant to fluctuations in temperature and fully suitable for drying processes and hard milling up to 200°C.
• Reinforcement of the chuck body over the diameter of the clamping nut produces tremendous stability with an optimum interference contour.
• Extremely low system concentricity of < 3 µm with the 2 µm ATORN UP collets. With Fahrion sealed collets 2 µm HPD to 80 bar for internal cooling (without sealing washer).
• Completely enclosed in the chuck cone for optimum stability and even distribution of clamping forces.
• Retention force is twice as high as with conventional collet chucks.

Notes

The previous standard DIN 69871-1 was replaced by ISO 7388-1.

Delivery

1x precision collet chuck SK40 (ISO 7388-1); incl. clamping nut