ORION HPC multi-tooth mill, long, diameter 16.0 x 16 x 65 x 125 mm, HA shaft
Brand: ORION
Surface: TiSiN
Length: 125 mm
Art.-no. 16931185
Manufacturer article no. 16931185
EAN 4053625351404
Application
Multi-tooth mill for circumferential machining, fine finishing and semi-roughing up to 68 HRC.
Execution
- solid carbide ultra-fine grain
- TiSiN-coated
- Unequal twist angle
- HA shaft in line with DIN 6535
- type H
- 0° chip angle
- cutting edge finish
- centre cutting
Advantage
- optimum chip removal and temperature resistance
- Maximum service life deu to TiSiN coating
Notes
At >60 HRC: ae = 0.07xD. Face cut from Z6 is only possible to a limited extent.
Brand | ORION |
EAN | 4053625351404 |
Manufacturer Part Number | 16931185 |
Cutting material | SC |
Surface | TiSiN |
Type | H |
Number of cutting edges (Z) | 8 PCS |
Twist angle | 45° |
Tool holding device | HA parallel shank |
Construction length | Long |
Cutting edge diameter | 16 mm |
Cutting edge length | 65 mm |
Length | 125 mm |
Shank diameter | 16 mm |
fz hard 65 HRC | 0.025 mm |
Product Group | 1FQ |
Gross Weight | 0.326 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | fz [mm/T] at diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | 160-180 | 0.04 | |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 160-180 | 0.04 | ⚫ |
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | 150-170 | 0.04 | ⚫ |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 150-170 | 0.04 | ⚫ |
| 6.00 Hard materials | ||||||
| 6.01 Hardened steel -55 HRC | x40CrMoV5-1 | -55HRC | 0.9620 | 155-175 | 0.04 | ⚫ |
| 6.02 Hardened steel -65 HRC | 90MnCrV8 | <65HRC | 135-155 | 0.04 | ⚫ | |
Last viewed
ATORN double vee block pair, vee block length 100 W x H 96 x 75
FAHRION prec. collet chuck DIN ISO 15488-B40 472E 24.00 RD GERC40-B (24-23)
ATORN twist drill TLP HSSE, DIN 1897, 1.2 mm x 30 mm x 8 mm, 130°
CLIP-O-FLEX seated system workstation with superstructure and drawer block
ORION high-perf. drill, SC TiNAlOX, HPC 3xD 4.5 mm x 6 mm x 66 mm HB external
ORION vee blocks grade III, vee block length 50 mm
DAkkS calibration without sticker micrometer with measuring jaws 5–100 mm
PFERD cylindrical diamond mounted points 2.0 x 4.0
ATORN clamping jaw size 2 offset, soft stainless steel, for vice 47105705
ZARGES lock set, 2 locks, keyed alike