ATORN SC mini radius cutter, diameter 0.2 x 0.2 x 1.0 x 50 mm, HA shaft
Brand: ATORN
Surface: ULTRA MS
Length: 50 mm
Art.-no. 16674004
Manufacturer article no. 11861264
EAN 4050293361889
Application
High-precision miniature radius cutter with long neck for process-reliable machining of stainless steels and alloys of titanium, nickel and cobalt.
Execution
- Ultrafine grain, cemented carbide
- Tolerance: < Ø 0.7 mm = 0/-0.012 mm and < Ø 4 mm = 0/-0.020 mm
- Radius tolerance = 0/-0.010 mm
- HA straight shank
- With clearance
- High-performance ULTRA MS coating
- Defined cutting edge rounding
Advantage
- Broad range of clearance lengths
- Optimum chip removal and temperature resistance
- Maximum service life through ULTRA MS coating
Brand | ATORN |
EAN | 4050293361889 |
Manufacturer Part Number | 11861264 |
Cutting material | SC |
Surface | ULTRA MS |
Type | VA |
Number of cutting edges (Z) | 2 PCS |
Twist angle | 30° |
Tool holding device | HA parallel shank |
Construction length | Long |
Cutting edge diameter | 0.2 mm |
Cutting edge length | 0.2 mm |
Clearance length | 1 mm |
Length | 50 mm |
Clearance diameter | 0.15 mm |
Shank diameter | 4 mm |
fz stainless steel | 0.003 mm |
Product Group | 1HK |
Gross Weight | 0.011 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | fz [mm/T] at diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | 20-45 | ⚫ | |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | 25-60 | ⚫ | |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | 25-60 | ⚫ | |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | 20-45 | ⚫ | |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | 20-45 | ⚫ | |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | - | ⚫ | |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | - | ⚫ | |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | - | ||
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | - | ||
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | - | ||
| 2.00 Stainless steels | ||||||
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 20-40 | ⚫ | |
| 5.00 Special alloys | ||||||
| 5.01 Titanium alloy | TiAI5Sn2,5 | <1200 | 3.7115 | 20-50 | ⚫ | |
| 5.02 Nickel-based alloy | NiCr21Mo | <1400 | 2.4858 | 20-60 | ⚫ | |
| 5.03 Super alloys | X45CrSi 9 3 | <1400 | 1.4718 | 20-50 | ⚫ | |
Last viewed
ATORN twist drill HSSE-V3 TiAlN 3XD 11.5 x 12 mm x 95 mm
Angle box 300x200x150 mm
Plastic tool handle, Swiss patent, 130 mm, red
METABO magnetic core drilling unit MAG 32
Screws for replaceable insert die-sinking cutter GWS 8
ATORN end mill HSSE PM TiAlN, 20.0 mm, TYPE N, DIN 844, short
ATORN twist drill U4 HSSE, DIN 338, 6.35 mm x 101 mm x 63 mm, 118°
ABUS padlock, TITALIUM series 64TI/60 keyed to differ
ORION rings for mill arbours, 32 x 0.05 mm, shape A DIN 2084
ATORN hand tap set HSS A/D/C 351 0 degrees thread 1/4 ISO2 D/S≤3xD